Multi Axis Computer Numerical Control Machine With 13000kgs Machine Net Weight

Products Details

Name: Cnc Deep Hole Drilling Machine Innder Diameter Of Drilling: 2.5-30mm
Max Depth Of Drilling: 800mm Table Size: 900*700mm
Travel: 1100*1050*1200mm Net Weight: 13000kgs
Depth 800mm Cnc Deep Hole Drilling Machine Making An Deep Hole Max Diameter φ 30 Product Feature 1. Meehannite casting ,aging treatment,ensure machine high rigidty 2. Three axis imported screw ,ensure machine high accuracy ,big powerfull torque 3. Imported three axis linear way ,high speed ,high load capacity , ensure max accuracy and durabolity 4. powerful spindle servo motorto satisfy processing at high or low speed Processing Range 1. Widely used for deep hole working of all kinds of workpieces Making an mold ,(include water pores, hot runners ,centre holes ,guide post etc)Auto parts , bent axis levers ,hydraulic pipes 2. Deep hole drilling differs from the traditional hole making methos ,and by specific drilling technolgy and one-pass ,it can achieve such advantages as precision machining effect, accurate hole site ,good dimensional accuracy ,high straightness and coaxiality ,very high surface smoothness and repeatabilitya. Moulds (including water pores, hot runners,centre holes, guide post holes, and ejector sleev holes )b. hydraulic value ,distributor and heat exchanger plate ,c. waterway hole, 3. Convenience for processing various deep holes, 4. Better solution for such various specific deep holes as cross holes , inclined holes, blind holes,and flate blind holes, advance and efficiency and consistency Specification
Model TL1600
Number of drilling spindle Uniaxial
Inner diameter of drilling 2.5-40mm
Max depth of drilling 1600mm
Size of working table 1800*1100mm
X axis travel 1600mm
Y axis travel 1100mm
Z axis travel 1650mm
Drilling cutting feed rate 10-250mm
Max rotary speed of spindle 7000rpm
Spindle motor (servo)11-15kw
Moving motor from right to left on work table servo 3.0kw
Moving motor from up to down on spindle servo 3.0 kw
Moving the motor from front to back on spindle servo 2kw
Pressure of cutting pressure pump 80 kgf/cm²
Oil mass of oil pressure pump 6-60 L/min
Capacity of cutting oil tank 700 L
load capacity of working table 10000kgs
machine net weight 13000kgs
Machine power 30kw
Standard accessories Taiwan spindle Fanuc or Mistubishi controller Spindle oil cooler NSK Bearing Gundrill Precision guide sleeve and rubber guide Grinder machine HIWIN linear way

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours