| Name: | Vertical Machine Center | Table Size: | 1000*550mm |
|---|---|---|---|
| Travel: | 800*500*500mm | Distance Between Spindle And Table: | 160-660mm |
| Distance Between Spindle And Column: | 524mm | Spindle Rotation Speed: | 10000/12000/15000rpm |
| Spindle Taper: | BT40-140 | ATC Type: | 24tools |
High quality Fanuc vertical machine centerV85P 
1. AdoptFFA software to analyze,vibration detector to replicate and optimize structure. 2. Super wide base ,X axis width up to 1.25m ,it is 0.39m wider than V85 ,widen base will increase thestability and dynamic responsiveness of the machine. 3. 3 axis high rigidity roller linear guide way ,X/Y axis 35mm width ,Z axis 45mm width, increase the cutting rigidity. 4. Without heavy hammer design ,increase Z axis power ,increase the responsiveness and procision ofZ axis. 5. Spindle box reinforced design ,decrease spindle high speed running deformation, increase the heavycutting performance. 
https://youtu.be/FSj4341xmFc
1. AdoptFFA software to analyze,vibration detector to replicate and optimize structure. 2. Super wide base ,X axis width up to 1.25m ,it is 0.39m wider than V85 ,widen base will increase thestability and dynamic responsiveness of the machine. 3. 3 axis high rigidity roller linear guide way ,X/Y axis 35mm width ,Z axis 45mm width, increase the cutting rigidity. 4. Without heavy hammer design ,increase Z axis power ,increase the responsiveness and procision ofZ axis. 5. Spindle box reinforced design ,decrease spindle high speed running deformation, increase the heavycutting performance. | Model | V85P |
| Table size | 1000*550mm |
| X axis Travel | 800mm |
| Y aixs Travel | 500mm |
| Z axis Travel | 500mm |
| Distance between spindle and table | 160-660mm |
| Distance between spindle and column | 524mm |
| Spindle rotation speed | 10000 /Direct connection 12000/15000rpm |
| Spindle motor | 7.5kw |
| Work table T slot | 5-18*100 |
| X/Y/Z axis ball screw size | 3616 |
| ATC type | 24too arm type |
| Time of changing tool | 2.5m/min |
| Rapid feed | 48*48*48m/min |
| X/Y/Z axis motor | 12/12/20NM |
| Max cutting feed | 10m/min |
| Min set moving unit | 0.001mm |
| Dimension | 2650*2900*2850mm |
| Net weight | 5000kgs |
| Max load of table | 600kgs |
| 1 | Fanuc Controller system | 8 | 10000 Rpm spindle |
| 2 | 24 tools arm type tool magazine | 9 | Spindle oil cooler |
| 3 | Heat exchanger | 10 | Full enclosed cover |
| 4 | Spindle encoder position system | 11 | Three axis inner encoder feedback system |
| 5 | Auto lubrication system | 12 | Pneumatic system |
| 6 | RS 232 Interface | 13 | Operation unit |
| 7 | Working light | 14 | Tool and tool box |
https://youtu.be/FSj4341xmFc